تلخیص
Cement production has been one of the most energy intensive processes in the world. Kilns serve as an
integral part to produce clinker which is a tool to measure capacity of system. The temperature inside
the kiln rises to 1400-1600 ºC while its surface temperature is between 200-400 ºC. The thermal efficiency
of a kiln is about 55-60% and the remaining heat is lost in the form of flue gases and radiated from the
surface. The current study has been carried out at a cement plant in Pakistan for the assessment of waste
energy recovery from the surface of a rotary kiln. An experimental setup of small scale waste heat
recovery with water heat exchanger has been fabricated at the plant site equipped with necessary
instrumentation. Measurements of heat recovery are carried out at different water mass flow rates,
surface temperatures, and transverse and radial distances of kiln. Results revealed that maximum water
temperature achieved was 25 ºC at 1.8 kg/min mass flow rate of water at kiln surface temperature of
320 ºC. The distance of kiln and heat recovery unit is 380 mm where maximum potential from kiln surface
is estimated to be 3.13 kW/m2. Thus, the current study proved significant waste heat recovery potential
from kiln shell of a cement industry which can be further utilized for any on-site application.
A. Hussain, M. Ali, H.M. Ali, M.S. Sabir, M. Mehboob. (2020) An Experimental Analysis of Waste Heat Recovery Potential from A Rotary Kiln of Cement Industry, The Nucleus, Volume-57, Issue-1.
-
Views
683 -
Downloads
41