مقالے کی معلومات
جلد
شمارہ
مقالے کی قسم
زبان
تلخیص
The amount of waste glass found in solid waste is growing enormously as the modernization is growing. Waste
glass deposited in landfills can be used in burnt clay bricks to overcome the problems faced by the brick kilns in
Pakistan. In Pakistan, most of the bricks kilns are located near the agricultural areas; therefore, agriculture
waste can be used as fuel for burning of bricks. This may result in lower strength of bricks due to lower
maximum temperature obtained through agricultural waste. However, brick kilns located near cities use coal as
fuel for burning of bricks which extracted from mines located thousands of miles away from brick kiln. This will
require considerable transportation cost in order to bring this coal fuel for brick burning process in order to
achieve higher temperature and consequently higher strength properties of bricks. In this study, glass waste was
mixed with clay mixture in order to achieve higher strength properties of bricks prepared with low energy fuel
(i.e. agricultural waste). Different proportions of waste glass from 0 to 20% at various temperatures i.e. 900,
950 and 1000 oC (temperature achieved through electrical oven) were investigated for the manufacturing of
waste glass-clay bricks in the laboratory. Furthermore, specimens were also prepared in the industrial brick
kilns for comparison purposes with the specimens prepared in the laboratory. Both laboratory and industrial
brick kiln specimens were tested for their physical and mechanical properties. Results showed that increasing
the waste glass content and burning temperature, the compressive and flexural strengths were increased, while
the water absorption and weight per unit area were decreased. This study made an effort to investigate the effect
of waste glass material in burnt clay bricks leading towards sustainable construction at low production cost.
Asif Hameed, Usman Haider, Asad-Ullah Qazi, Safeer Abbas. (2018) Effect of Waste Glass on Properties of Burnt Clay Bricks, Pakistan Journal of Engineering and Applied Sciences, VOLUME 22, Issue 1.
-
Views
2077 -
Downloads
208