مقالے کی معلومات
جلد
شمارہ
مقالے کی قسم
زبان
تلخیص
A study is conducted to compare cost, construction time frame and safety of the inverted-T Girder
design concept used in the design of Shalimar Flyover with conventional I-girder. First, the
superstructures with NHA (National Highway Authority) ‘Type H’ I-girder at five different centre to
centre spacing are designed and the one at 2.75m is found to be the most economical for the span used
at Shalimar Flyover. Secondly the economical I-girder superstructure is compared with the InvertedT girder superstructure used at Shalimar Flyover at 1m centre to centre spacing and it is observed
that the inverted-T girder at 1m c/c spacing is 22.64 % more expensive than the I-girder super
structure at 2.75m c/c spacing. However, the Inverted-T girder super structure is lesser in depth and
requires lesser number of spans for the same reach than the I-girders. This reduces land acquisition
cost which in turn affects the total cost of the project. The Inverted-T girders are also checked at
different spacing and it is found that the same girder section at 1.3m centre to centre spacing is 9.06
% economical than the adopted 1m c/c spacing of the girders at Shalimar Flyover.
Asif Hameed, Umer Farooq, Asad-ullah Qazi, Burhan Sharif. (2012) Cost Comparison of Inverted Tee Girder with I-Girder: A Case Study of Shalimar Flyover, Pakistan Journal of Engineering and Applied Sciences, Volume 10, Issue 1.
-
Views
2017 -
Downloads
167