مقالے کی معلومات
جلد
شمارہ
مقالے کی قسم
زبان
تلخیص
For the generation of heat and electricity thermochemical conversion of feedstock is the most
efficient clean, and environmentally friendly conversion process. In Pakistan, biomass and coal
conversion through thermochemical conversion processes has got weighty consideration
nowadays. As Pakistan is rich in biomass and coal resources. The producer gas produced from
carbon-containing materials contains mainly CO, CO2, H2 and CH4. A numerical model of
entrained flow gasifier is established to simulate coal, biomass blends through entrained flow
gasifier. However, locally available coal deposits contain higher amounts of moisture and ash. Due
to high moisture and ash content in coal results in lower reactivity along with the difficulty in
handling of ash produced during gasification. In this research work, biomass and coal were cogasified in entrained flow gasifier. The challenges arising because of the varying thermo-physical
properties of both feedstocks such as volatile fraction, density and ash are taken into consideration
in order to produce engine quality syngas. The feeding rate inside the concentric tube entrained
flow gasifier was maintained at 82 kg/hr. Dry Pakistani coal and sugarcane bagasse were used as a
feedstock for gasification. In this study varying mixing schemes were adopted in order to achieve
the best performance during the cogasification process. The optimum blending ratio was found at
a blending ratio of 35:65 on a weight basis. At the optimum blending ratio, the CGE and CCE was
87% and 99.8%, respectively.
Ghulamullah Maitlo, Ghulam Abbas Kandhro, Rashid Mustafa Korai, Abdul Karim Shah, Inamullah Maitlo. (2019) Computational Fluid Dynamic (CFD) Simulation of Thar Lignite Coal and Sugarcane Bagasse in Entrained Flow Gasifier, Pakistan Journal of Analytical & Environmental Chemistry, Volume 20, Issue 2.
-
Views
1370 -
Downloads
89